SwitchBlox - Small Ethernet Switch
- Dimensional Drawings
The Ethernet Switch built for Compact Tech
SwitchBlox is a small ethernet switch with five 10/100MB ports, specifically designed for space-constrained and noisy environments.
With an overall size of 44.5mm (1.75 inches) by 44.5mm (1.75 inches), SwitchBlox is the smallest network switch in the world, making it perfect for robots, drones, or any space-limited networking application.
Plug and play network switch
As an unmanaged network switch, it works straight out the box, all you need to do is...
- Apply a 5 to 60V DC supply.
- Connect your devices using the included cable set.
- It will automatically begin forwarding packets, no coding or setup needed.
We've squeezed all necessary Ethernet circuitry into SwitchBlox without making performance compromises. We use magnetics for improved signal integrity and electrical isolation between each ethernet bus.
We use Molex Picoblade connectors on all our boards to keep them tiny. All boards ship with a cable set included, which consists of...5 x PicoBlade to RJ-45 300mm (SKU: BB-PBRJ1-4-0.3)
1 x PicoBlade to bare wires 300mm (SKU: BB-PBTL1-4-0.3)
Below is a handy graphic that shows how we transition from a Molex Picoblade pinout to the standard RJ-45 ethernet cables. For 10/100 Mbps ethernet we use two differential channels, transmit and receive, for a total of four conductors.
Switch Management Features (VLAN, Port Mirroring)
Management features such as VLAN (Port and tag-based) and Port Mirroring is possible on SwitchBlox by using our open-source firmware and software package. To configure this, read our software guide or get in touch for support.
Passive PoE injection onboard
We’ve added circuitry to SwitchBlox that allows you to inject voltage onto any combination of the ports, simply by toggling a DIP switch on the back.
Enabling this feature requires a 0-ohm resistor to be soldered to the board, more information can be found in the datasheet.
PoE Selective Port Injection
Input Voltage Range 5-60V (reverse protected) Power Consumption
300mW (Idle), 700mW (Max) Output Voltage 5V, 2A (5V test results) Ports
5 x 10/100Mb ports Operating Temperature
-30 to +70°C
Storage Temperature -40 to +85°C Dimensions
45mm x 45mm x 18mm PoE 15W (IEEE 802.3af)
SwitchBlox Dimensional Drawing PDF
SwitchBlox Dimensional Drawing DXF